SURPLUS NEW AND USED FITTINGS
for classic boats

Fittings on this page are used unless stated otherwise. They are for sale as is,
and except where stated otherwise are available world-wide. Prices are in Australian dollars.

Please note that while many of these items are held by Wooden Boat Fittings, some are listed on consignment on behalf of other owners.
Our own items are fit for their intended purpose, and are accurately described in the text and photographs.
Items on consignment are listed in good faith, and their description is warranted accurate by the owner.
In the unlikely event that a dispute arises over a transaction between a consignment seller and a buyer,
Wooden Boat Fittings accepts no liability on behalf of either party.

For enquiries about any of these items, or to place a free advertisement on this page, please contact us.

Click on any image to enlarge it

Please remember to refresh your browser

Updated 30 June 2017


ITEM

DESCRIPTION


Lot 19 -- Stainless steel eye-bolts

Shank length 6", plus 1" ID welded eye. Made from 3/8" stock, with an external thread. These are new fittings.

Sale price -- $5.00 each


Lot 23 -- Single becketed block

Stainless steel Ronstan brand single becketed block. Sheave dia. 1 3/4". This is a used fitting in first-rate order.

Sale price -- $30.00.


Lot 24 -- Single swivel block

Stainless stell Hilite swivel single block. Sheave dia. 1 3/4". This is a used fitting in working order, but needs some cleaning.

Sale price -- $15.00.


Lot 25 -- Three small single blocks

Set of three stainless steel Riley blocks with 1" sheaves. Used and with some paint stains, but all in working order.

Sale price -- $5.00 each or $12.50 the set.


Lot 33 -- Copper square-shank flat-head nails

2 1/2" long x 8 gauge. 19 nails only.
Manufacturer Otter Nails.
These are new items

Sale price -- $5 the lot.


Lot 34 -- Copper square-shank flat-head nails

1 1/2" long x 10 gauge. Approx. 4.75 kg.
Manufacturer Otter Nails.
These are new items
.

Sale price -- $55.00/kg pro rata down to 200 pieces, and 25 cents each for smaller quantities.


Lot 36 -- 'Seagull' outboard motor

A fine example of this world-famous two-stroke outboard motor. This is a 'Silver Century' Model 75 long-shaft motor with clutch, rated at 4.5 hp.

This motor comes complete with a cast aluminium mounting-plate that can be bolted permanently to the transom, a starter-rope with a varnished wood handgrip, and a varnished wood tiller extension (not shown).

The model was built from 1979 to 1990, and it is believed this particular motor dates from1986. It runs on a 25:1 two-stroke mix, and when last operated about six years ago was functioning perfectly.

This motor is rated by Saving Old Seagulls (the site for all information about Seagull outboards) as being suitable as "a second motor for a motorboat or on 14 to 19 foot heavy dinghies". It spent its working life as the motor driving a 15' plumb-stemmed traditional clinker dinghy, to which task it was eminently suited.

Pick up from Canberra only.

Sale price -- $295.00.


Lot 37 -- Electric bilge pump

Submersible 'Rule' 12v bilge pump, rated at 360 gph. This unit is complete with leads and battery clips, and takes a 3/4" dia outlet hose. (The one presently attached can be provided at no charge if required.)

Sale price -- $15.00.


Lot 38 -- Copper roves

5/8" dia x 13 gauge. 110 roves altogether.
Manufacturer Otter Nails.
These are new items.

Sale price -- $15.00 the lot.


Lot 40 -- Fluke anchor

Fluke anchor with tripping ring, galvanised.

Length of stock 22", width across palms 9", weight 7 lb.

Sale price -- $25.00.


Lot 50 -- Pulpit

Stainless steel pulpit, with built-in 12v port/starboard navigation lights. Size 8' x 4'-9" x 2'-3" high. Suit vessel from 20' LOA.
Pick up from South Gippsland, Victoria.

Sale price -- $150.00


Lot 51 -- Bumkin

Stainless steel bumkin, complete with transom-mounting brakcets and chain bobstays. 2'-9" long x 3'-5" wide. Suit vessel from 20' LOA.
Pick up from South Gippsland, Victoria.

Sale price -- $75.00


Lot 56 -- Stemhead fitting

Stainless steel stemhead fitting to fit a 5" sq stem, tapering down
to 3 3/4" over a 4" depth. The front face continues as a tang for a further 8 1/2" down the face of the stem. Made from 3/16" and 1/4" plate, it carries a 2 1/2" flange with three holes for forestay and other connections. It attaches using 4 no. SS coach bolts, supplied.

Sale price -- $100.00


Lot 57 -- Chainplates

Assorted stainless steel chainplates and other shroud fittings. Chainplates are 22" long x 2" wide, and 3/8" thick.

Sale price -- $55.00 the lot


Lot 58 -- Mast step

Stainless steel mast step for deck mounting. Dimensions 15 1/2" x 6 3/4", made from 7/32" and 3/16" plate. Weight 9 lb. Mounted through deck with 6 no. machine bolts (supplied). Carries a 12" flange 2" high, with 5 no. holes for through-mast bolting, allowing the mast to be moved forward or aft to adjust rake or sail balance.

Sale price -- $45.00


Lot 66 -- Deckhead or bulkhead light fitting

Stainless flush light fitting with prismatic glass lens. Overall dia. 7", lens dia. 4 1/2". Wired for 12v, SBC globe-holder, switch, and complete with LED globe. This is a top-quality fitting. (Note -- the photo shows the fitting assembled and disassembled. There is only one fitting.)

Sale price -- $20.00


Lot 67 -- Fluorescent light fitting

Switched 12v plastic wall or ceiling light, holding 2 no. 11" fluorescent tubes, and with diffusing plastic cover. Overall size 14 1/2" x 2 3/4".

Sale price -- $20.00